3D printed Bluetooth speaker
============================

Design:  Tiny John - Open Source Bluetooth Speaker
Author:  Joshua's Oddities (JoshuaisOdd)
Source:  https://www.printables.com/model/1626880
Licence: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
         https://creativecommons.org/licenses/by-sa/4.0/

What's in this zip
------------------
Tiny John Everything 3MF.3mf          The author's print plates, unchanged.
Tiny John complete STEP.step          The author's CAD model, unchanged.
Tiny John Speaker Assembly Guide.pdf  The author's assembly guide, unchanged.
assembly-stl/                         Our STL files, one per part or group of parts,
                                      in millimetres, z up, each part where it sits in
                                      the finished speaker. They are for viewing; print
                                      from the 3MF.
LICENSE.txt                           The licence.

Changes by CadFlow: we converted the author's STEP model to STL in the
assembled position and split it into parts; moved the two mesh inserts
(front and side), which the STEP keeps on the print plate, into their
recesses, and mirrored the one driver gasket and the side mesh so both
speakers have them; added simple stand-in shapes for the bought parts
(two 2-inch drivers, the amplifier board and a 4 x AA battery holder);
and left out the thermoforming dies and the radiator puck. The
step-by-step instructions on cadflow.app are our own.

Because the original is CC BY-SA 4.0, our modified files (the STLs in
assembly-stl/) are also released under CC BY-SA 4.0. If you share or adapt
any of this, credit Joshua's Oddities, link the source and the licence,
say what you changed, and share your version under the same licence.
