3D printed table lamp
=====================

Design: mid-century modern lamp
Author: Catdad Workshop
Source: https://www.printables.com/model/335575
Licence: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
Licence URL: https://creativecommons.org/licenses/by-sa/4.0/

What's in this zip
------------------
original files by Catdad Workshop/
    All the STL files as the author published them: the base, insert, spacer 1,
    spacer 2, the original fluted shade, three alternative shades (vase, pumpkin,
    studded) and the shade remix kit. Every shade uses the same twist-lock mount,
    so any of them fits the same base and insert.

cadflow assembly (for viewing)/
    The parts of one build (base, spacer 1, spacer 2, insert, original shade) placed
    where they sit in the finished lamp, plus simple stand-ins for the parts you buy
    (cord set with E27 socket, socket ring, LED bulb). These are for looking at, not
    for printing: print the originals.

Changes by CadFlow: we placed the parts of one build (base, both spacers, insert and
the original shade) in their assembled positions in one coordinate frame (base turned
the right way up), opened the vase-mode insert and shade as they print, reduced the
shade's triangle count for the web viewer, added simple models of the cord set, socket
ring and bulb, and wrote our own assembly instructions. The author's original files
are included unchanged.

Our modified files are licensed under CC BY-SA 4.0 too, the same licence as the
original design: https://creativecommons.org/licenses/by-sa/4.0/

Safety
------
Use a ready-made, certified pendant cord set with an E27 socket and plug. Don't wire
mains electricity yourself. Use LED bulbs only, 7 to 9 W at most: the printed parts
are plastic and soften with heat, so never fit an incandescent or halogen bulb.

Instructions: https://www.cadflow.app/library/3d-printed-table-lamp
