3D printed Bluetooth speaker
A pair of horn-loaded speakers joined by a small electronics box, with TPU passive radiators underneath for bass. You print the shell, seals and grilles, then fit a cheap DIY Bluetooth amp kit with two 2-inch drivers, running on four AA batteries or USB.
265 × 135 × 198 mmPETG, TPU and PLA2 × 2-inch drivers, 2 passive radiators4 × AA batteries or USB
Loading the model…
What you need
- 1 × DIY Bluetooth speaker kitamp board, power switch, wires and two 2-inch (about 52 mm) drivers; any kit with 2-inch drivers should fit
- 22 × M2 × 8 mm self-tapping screws16 for the backs, 4 for the bridges and housing, the rest spare
- 8 × M3 × 5 mm self-tapping screws4 per driver
- 4 × AA batteriesor a USB power lead, with its red and black wires swapped
- PETG filamentglass-fibre PETG is best; for the enclosures, backs, bridges and rings, and PETG or better for the forming dies
- TPU filament, 90Afor the seals, feet and passive radiators
- PLA filamentfor the mesh inserts; the electronics housing can be any rigid filament
- Silicone sealantthe only glue that holds on TPU
- Supergluefor the mesh inserts
Tools
- A 3D printer that can print TPU
- The printer's heated bed, for thermoforming
- A small Phillips screwdriver
- A toothpick
- Wire cutters and tape or heat-shrink, if you use a USB lead
Files
Design: Tiny John – Open Source Bluetooth Speaker by Joshua's Oddities, under CC BY-SA 4.0. Converted the STEP model to STL in the assembled position, split it into parts, moved the mesh inserts into place and added stand-ins for the bought electronics; the instructions are our own, and our files are shared under CC BY-SA 4.0 too.