The best desktop CNC machines for 2027: 12 compared by price

· 14 min read

A desktop CNC router drawn grey with black edges, its bit cutting a pocket in a yellow board

A desktop CNC machine cuts parts out of wood, plastic and soft metals from a 3D model, the way a 3D printer builds them up. These are twelve desktop machines on sale now from six makers, grouped by what they cost to start with, cheapest first. Every price, size and spec is from the maker’s own site, read on 11 November 2026. Several were on Black Friday sale that day, and we say so where they were.

Two words come up a lot. A machine with a spindle has its motor included; a machine that takes a router expects you to add a trim router (such as the Makita RT0701C) or the maker’s own spindle, at extra cost.

Under $1,500

The Genmitsu 3018-PROVer V2 with its blue guard and a carved wooden panel on its bed

Genmitsu 3018-PROVer V2

$269from SainSmart, with its spindle

Spindle: included, a 775 motor

SainSmart's small starter kit, sold half assembled. It cuts 290 × 180 mm and only 40 mm deep, enough for signs, PCBs and small parts in wood and plastic. It runs on GRBL, so most free control programs work with it.

Pros

  • The cheapest way in, at $269
  • Works with free programs: Candle, UGS and Easel
  • Limit switches, an emergency stop and a port for a laser

Cons

  • Small: 290 × 180 mm and 40 mm of Z
  • Round shafts and lead screws, with a plastic X-Z carriage
  • A small 42 mm spindle

Photo: SainSmart

The Genmitsu 4040-PRO, a blue and silver gantry machine over a wooden spoilboard

Genmitsu 4040-PRO

$519from SainSmart, with its spindle

Spindle: included, 75 W

The same idea as the 3018 with four times the bed: 400 × 400 mm, all aluminium, on lead screws. It comes with an offline controller, so you can run a job from a card without a computer, and its spindle mount takes a bigger one later.

Pros

  • 400 × 400 mm for $519
  • Offline controller, Z probe and emergency stop in the box
  • Mounts for 42 and 52 mm spindles, to upgrade

Cons

  • A 75 W spindle cuts slowly
  • Lead screws, not ball screws
  • 78 mm of Z in its spec table

Photo: SainSmart

The Onefinity Apprentice, a black gantry with steel shafts, on a wooden base

Onefinity Apprentice

$995on sale, $1,199 list, no router

Router: not included, takes a 65 mm one

The smallest machine from Onefinity, made in Canada: 419 × 419 mm on 30 mm hardened steel shafts and 16 mm ball screws. Onefinity says you can be carving in under an hour. It needs a computer to run it, and a router.

Pros

  • Ball screws and steel shafts for under $1,000
  • A year of Carveco Maker included
  • 2-year warranty on its mechanics

Cons

  • No router: add a Makita RT0701C or Onefinity's spindle
  • Needs a computer to run
  • 114 mm of Z travel

Photo: Onefinity CNC

The Makera Z1, a black enclosed desktop CNC with a clear front

Makera Z1

$1,249on sale, $1,399 list; €1,249 in the EU

Spindle: included, 150 W

Makera's newest and smallest machine, a closed box with a one-piece cast frame, a camera inside and its own dust collection. It raised $10.24 million on Kickstarter in October 2025. The Z1 Pro ($1,649) swaps the lead screws for ball screws.

Pros

  • Enclosed, so the chips and most of the noise stay in
  • Probes and levels the stock itself
  • Makera's own CAM, Makera Studio, free

Cons

  • Small: 200 × 200 × 100 mm
  • Lead screws, and 1,200 mm/min at most (the Pro 2,000)
  • EU orders currently ship from China, 31 to 80 days on the way

Photo: Makera

$1,500 to $2,500

The Shapeoko 4, a silver and black gantry over a slatted bed

Shapeoko 4

$1,800Standard; XL $2,150, XXL $2,400; no router

Router: not included, Carbide's is $80

Carbide 3D's belt-driven machine, out since 2021 and still sold beside the 5.1 Pro. The Standard cuts 444 × 444 mm, the XXL 838 × 838 mm. It comes with Carbide 3D's free Carbide Create and Carbide Motion.

Pros

  • Three sizes, up to 838 × 838 mm
  • BitSetter measures each new bit for you
  • Free Carbide Create and Carbide Motion

Cons

  • Belts and V-wheels, not rails and screws
  • 101 mm of Z
  • No router in the box

Photo: Carbide 3D

The Stepcraft D.600, an orange and silver gantry over an aluminium T-slot table

Stepcraft D-Series

From $1,899D.420 kit; D.600 $2,199, D.840 $2,699; no spindle

Spindle: not included, the 1000 W one is $499

Made in Germany: aluminium extrusions with track rollers and igus lead screws, sold as a kit or ready to run. It's built to carry more than a spindle: Stepcraft sells a laser, a tangential knife and a 3D print head for it.

Pros

  • Three sizes, up to 594 × 833 mm
  • 5-year warranty
  • UCCNC control software included

Cons

  • The US store says call for availability
  • Lead screws, not ball screws
  • UCCNC runs on Windows only

Photo: Stepcraft

The Makera Carvera Air, an enclosed desktop CNC with a smoked lid

Makera Carvera Air

$1,999on sale, $2,699 list; €2,149 in the EU

Spindle: included, 200 W

A smaller, cheaper Carvera from 2024: 300 × 200 × 130 mm in a die-cast, fully enclosed frame, with ball screws on every axis. You change bits by hand with a quick-change collet, and it probes the stock itself.

Pros

  • Enclosed, with ball screws on every axis
  • Probes and levels the stock itself
  • A 5 W laser ($149) and a 4th axis ($499) as add-ons

Cons

  • You bring your own vacuum for the dust
  • 300 × 200 mm
  • EU orders currently ship from China

Photo: Makera

The Onefinity Gen 2 Elite on its stand, with a screen on the left

Onefinity Gen 2 Elite

From $2,195on sale, Woodworker; up to $3,025; no router

Router: not included; with one, $2,695

Onefinity's big machine in three sizes, from the 838 × 838 mm Woodworker to the 1245 × 1248 mm Foreman. It runs on 60 mm and 50 mm steel shafts with ball screws and closed-loop motors, and can take an optional 15-inch screen so it needs no computer.

Pros

  • Up to 1245 × 1248 mm, with 163 mm of Z travel
  • Closed-loop motors and a 5-year warranty
  • Starter package with a Makita router and probe, $2,695

Cons

  • No router in the base price
  • New orders ship in batches from December 2026
  • The screen adds $650

Photo: Onefinity CNC

Over $2,500

The Carbide 3D Nomad 3 in a bamboo enclosure, lit inside

Carbide 3D Nomad 3

$2,800from Carbide 3D, with its spindle

Spindle: included, 130 W

A small closed mill, built in Carbide 3D's California shop since 2020, for small parts and circuit boards. It cuts 203 × 203 × 76 mm and comes with the most software of the twelve, including MeshCAM and Alibre Workshop.

Pros

  • Enclosed, with a door interlock
  • MeshCAM, Alibre Workshop and Carbide Copper included
  • 18-month warranty

Cons

  • Small: 203 × 203 × 76 mm
  • Round rods on X and Y
  • The new Nomad 4 ($5,400) doesn't ship outside the US

Photo: Carbide 3D

The Shapeoko 5.1 Pro 2x2, a black machine with a slatted bed

Shapeoko 5.1 Pro

From $2,9802x2 with router; 4x2 $3,550, 4x4 $3,800 without

Router: included on the 2x2 only

It replaced the Shapeoko 5 Pro in November 2025, made in Illinois: linear rails and ball screws on every axis, no belts. The 4x4 cuts 1237 × 1237 mm, and every size has 155 mm of Z travel.

Pros

  • HG-15 rails and 16 mm ball screws on every axis
  • BitSetter, a pendant with an emergency stop, and four training sessions
  • Free Carbide Create and Carbide Motion

Cons

  • The 4x2 and 4x4 come without a router
  • 3D carving needs Carbide Create Pro, $120 a year
  • Legs are $350 more

Photo: Carbide 3D

The Makera Carvera, an enclosed CNC with a silver base and a smoked lid

Makera Carvera

$4,799on sale, $5,799 list; €4,949 in the EU

Spindle: included, 200 W

The machine that made Makera's name on Kickstarter in 2021. It changes its own bits from a rack of six, probes the stock with a wireless probe, has a 2.5 W laser built in and collects its own dust. It cuts 360 × 240 × 140 mm.

Pros

  • Changes its own bits, six of them
  • Laser, probe and dust collection built in
  • Servo motors on X, Y and Z

Cons

  • The price: more than twice a Carvera Air
  • 360 × 240 mm of bed
  • EU orders currently ship from China

Photo: Makera

The X-Carve Pro, a black machine with an MDF wasteboard, on a dark background

X-Carve Pro

From $4,9954x2; 4x4 $7,495; with spindle

Europe: no, it ships only to the US

Inventables stopped making the belt-driven X-Carve in December 2024 and now sells only this one: ball screws, linear guides and a 1.5 kW spindle, for 1219 × 610 mm or 1219 × 1219 mm. It's run from Easel, Inventables' browser program.

Pros

  • A 1.5 kW spindle included
  • Ball screws and linear guides
  • Cuts full 4 × 8 ft sheets in parts, by tiling

Cons

  • Ships only to US addresses
  • Easel's free plan allows one carve a week; Pro is $24 a month
  • No laser or tool changer planned

Photo: Inventables

All twelve side by side

Machine Price Work area (mm) Moves on Spindle or router
Genmitsu 3018-PROVer V2 $269 290 × 180 × 40 Round shafts, lead screws 775 motor included
Genmitsu 4040-PRO $519 400 × 400 × 78 Lead screws 75 W included
Onefinity Apprentice $995 419 × 419, 114 Z travel Steel shafts, ball screws Router not included
Makera Z1 $1,249 200 × 200 × 100 Linear rails, lead screws 150 W included
Shapeoko 4 $1,800 444 × 444 × 101 V-wheels, belts Router not included
Stepcraft D-Series $1,899 300 × 420 × 132 to 594 × 833 × 132 Track rollers, lead screws Spindle $499 extra
Makera Carvera Air $1,999 300 × 200 × 130 Rods and a rail, ball screws 200 W included
Onefinity Gen 2 Elite $2,195 838 × 838 to 1245 × 1248, 163 Z travel Steel shafts, ball screws Router not included
Carbide 3D Nomad 3 $2,800 203 × 203 × 76 Rods, a rail on Z 130 W included
Shapeoko 5.1 Pro $2,980 623 × 623 to 1237 × 1237, 155 Z travel Linear rails, ball screws Router on the 2x2 only
Makera Carvera $4,799 360 × 240 × 140 Rails and rods, ball screws 200 W included
X-Carve Pro $4,995 1219 × 610 × 102 to 1219 × 1219 × 102 Linear guides, ball screws 1.5 kW included

Prices are each maker’s lowest on its US store on 11 November 2026, in US dollars. Where a maker gives only inches, we turned them into millimetres.

How a machine moves matters more than its size. Belts and round shafts are cheap and fine for wood, but they bend a little under load, so the cut wanders in hard material. Linear rails and ball screws hold the bit where it should be, which is what you want for aluminium.

What each one costs to start

Genmitsu 3018-PROVer V2$269With its spindle
Genmitsu 4040-PRO$519With its spindle
Onefinity Apprentice$995On sale from $1,199. No router
Makera Z1$1,249On sale from $1,399. With its spindle
Shapeoko 4$1,800No router
Stepcraft D.420$1,899A kit, no spindle
Makera Carvera Air$1,999On sale from $2,699. With its spindle
Onefinity Gen 2 Elite$2,195On sale from $2,437. No router
Carbide 3D Nomad 3$2,800With its spindle
Shapeoko 5.1 Pro$2,980The 2x2, with Carbide's router
Makera Carvera$4,799On sale from $5,799. With its spindle
X-Carve Pro$4,995The 4x2, with its spindle
The lowest price for each machine on its maker's US store on 11 November 2026. Hover a bar to see whether the spindle is included.
Show as a table
MachinePrice
Genmitsu 3018-PROVer V2$269
Genmitsu 4040-PRO$519
Onefinity Apprentice$995
Makera Z1$1,249
Shapeoko 4$1,800
Stepcraft D.420$1,899
Makera Carvera Air$1,999
Onefinity Gen 2 Elite$2,195
Carbide 3D Nomad 3$2,800
Shapeoko 5.1 Pro$2,980
Makera Carvera$4,799
X-Carve Pro$4,995

The machines without a router cost more than the chart shows, unless you already have one. Carbide 3D sells its own for $80, and Onefinity’s starter package with a Makita router and a probe is $500 more than the Gen 2 Elite alone.

Not on the list

Carbide 3D’s new Nomad 4 ($5,400) has a 1200 W spindle and ball screws, but it ships only within the US. FoxAlien’s Masuter 3S ($999.99, with a 400 W spindle and a 400 × 400 mm bed) and Genmitsu’s PROVerXL 4030 V2 ($1,259, with ball screws) are worth a look if the 4040-PRO is too light. Makera shows a new machine, the A1S, with a 12-tool changer, on 18 November 2026; it had no price or specs when we checked.

Which would we buy?

In our opinion: to learn on, the Genmitsu 4040-PRO, which costs little and cuts a useful area. For wood on a budget, the Onefinity Apprentice has ball screws for under $1,000, once you add a router. If you want a closed machine for the house, the Carvera Air; for a garage and big sheets, the Shapeoko 5.1 Pro or the Onefinity Gen 2 Elite.

Each of them cuts what you draw first, as a 3D model. Our guide to CAD software compares the programs to draw it in, and CAD MCP servers shows how to let an AI help. If you’d rather not own a machine at all, online manufacturing services will mill a part for you from the same file.

We make CadFlow, modern CAD for makers and engineers: faster to model, easier to use and more robust than traditional CAD. It isn’t public yet. If you'd like to try it, join the waitlist.

Questions people ask

What's the best desktop CNC for a beginner?

One that's cheap enough to learn on and runs free software. The Genmitsu 4040-PRO ($519) and 3018-PROVer V2 ($269) run on GRBL, which free programs such as Candle and UGS control. If you'd rather have it all in one box, the Makera Z1 ($1,249) and Carvera Air ($1,999) come with Makera's own free CAM.

Can a desktop CNC cut aluminium?

Yes, slowly, with small bits and shallow passes. A stiff machine helps most: look for linear rails and ball screws, such as the Shapeoko 5.1 Pro, the X-Carve Pro or the Makera machines, rather than belts and round shafts.

Do I need to buy a router or spindle as well?

For the Onefinity machines, the Shapeoko 4, the Stepcraft D-Series and the Shapeoko 5.1 Pro 4x2 and 4x4, yes. They take a 65 mm trim router such as the Makita RT0701C, or the maker's own spindle. The Genmitsu, Makera, Nomad 3 and X-Carve Pro machines come with theirs.

What software do these machines use?

Each one needs two programs: CAM, which turns your 3D model into toolpaths, and a sender that drives the machine. Carbide 3D includes Carbide Create and Carbide Motion, Makera its Makera Studio, Onefinity a year of Carveco Maker, Stepcraft UCCNC, and Inventables uses Easel. The GRBL machines work with free senders such as Candle, UGS and Sienci Labs' gSender. You draw the part itself in CAD first.

Which of these can I buy in Europe?

Makera has an EU store with prices in euros, VAT included (its CNC orders for the EU currently ship from China). SainSmart's own store lists the Genmitsu machines for Europe and the UK, Stepcraft is a German company with dealers across Europe, Onefinity sells through Trend in the UK, and Carbide 3D ships its machines abroad, with customs paid by you. The X-Carve Pro and the Nomad 4 ship only within the US.

How did we pick and order them?

We picked machines that are on sale now from six makers, from a $269 starter kit to machines near $5,000, and ordered them by the lowest price on each maker's own store on 11 November 2026, cheapest first. We don't rank one above another: what's best depends on what you cut and how much room you have. Every fact on the cards comes from the maker's own product, spec or policy pages, read the same day.

Free tools for this

History of this post

  1. Published
Every post by its last update

This blog is by the team making CadFlow, where you build your project in 3D and show how it goes together.

See how CadFlow works