Laser-cut phone stand
Four flat parts that slot together into a stand that holds a phone at 65°, upright or on its side. No glue and no screws: cut it from 3 mm plywood or acrylic and push it together.
92 × 90 × 105 mm3 mm plywood or acrylic4 parts, slotted togetherAbout 3 min to cut
Loading the model…
What you need
- 1 × Plywood or acrylic, 3 mma piece 200 × 130 mm
Tools
- A laser cutter
- Fine sandpaper, for the edges
Files
Designed by CadFlow. Free to use, share and change under CC0.