3D printed robot arm (SO-101)

An open-source desktop robot arm with five joints and a gripper, driven by six small serial-bus servos. You print eleven parts, screw the servos in joint by joint, and it's ready for teaching and learning robotics on your desk.

Reaches about 40 cm6 × STS3215 servosAbout $120 in partsPLA+, about 10 to 14 h to print

Loading the model…

What you need

  • PLA+ filamentabout 350 g; the 11 printed parts
  • 6 × Feetech STS3215 servos7.4 V version with 1/345 gearing (C001), about $14 each; the 12 V version is stronger if you want more lift
  • 1 × Serial bus servo driver boardWaveshare bus servo adapter or similar, about $11
  • 1 × Power supply5 V, 4 A or more with a 5.5 × 2.1 mm plug for the 7.4 V servos (12 V for the 12 V servos), about $10
  • 1 × USB-C cablefrom the driver board to your computer, about $4
  • 2 × Table clampsto hold the base to the desk, about $5
  • Screwsthe M2 and M3 self-tapping screws that come with the servos are all you need

Tools

  • A 3D printer (about 200 × 200 mm bed or larger)
  • Phillips screwdrivers, #0 and #1
  • Flush cutters or pliers for supports
  • A computer with the LeRobot software installed

Files

Design: SO-101 (SO-ARM100) by TheRobotStudio, under Apache-2.0. Placed every part and servo where it sits in the assembled arm, using the positions in the author's simulation model, for the viewer; the instructions are our own.