Spanner size finder

Pick your bolt to see the spanner and hex key it takes, or start from the spanner in your hand.

Start from

An M8 bolt takes a

13 mm spanner

M813 mm
Spanner
6 mm
Hex key, socket head6 mm
Hole for it to pass through
9 mm
Tap drill
6.8 mm

What the sizes mean

Spanner: across the flats of the head
Hex key: across the socket in the head
Clearance hole: a little wider than the bolt
Tap drill: smaller than the thread cut into it

The spanner and the hex key fit the head, not the thread: an M8 bolt is 8 mm across its thread and takes a 13 mm spanner. A nut takes the same spanner as its bolt.

The spanner for every metric bolt

SizeSpannerHex keyClearance holeTap drill
M241.52.41.6
M2.5522.92.05
M35.52.53.42.5
M4734.53.3
M5845.54.2
M61056.65
M813696.8
M1016DIN 178118.5
M1218DIN 191013.510.2
M1421DIN 221215.512
M16241417.514
M1827142015.5
M2030172217.5
M2234DIN 32172419.5
M2436192621

All sizes in millimetres.

Why a 17 mm spanner doesn't fit every M10 bolt

Two standards describe the same hex bolts. The older German DIN 933 puts a 17 mm hex on M10, and ISO 4017, which replaced it, a 16 mm one. They also differ at M12 (19 against 18 mm), M14 (22 against 21 mm) and M22 (32 against 34 mm), and agree at every other size. If your spanner slips on a new bolt, try the other standard's size.

From the standards themselves: ISO 4014 and ISO 4017 for hex bolts, DIN 931 and DIN 933 for the older ones, ISO 4762 for socket head cap screws and ISO 273 for clearance holes, each checked against at least two published tables. The heads, nuts and washers are in our metric bolt size chart, and the tap drills in the tap drill calculator.

Questions people ask

What size spanner for an M10 bolt?

16 mm for a bolt made to ISO 4017 or ISO 4014, and 17 mm for one made to the older DIN 933 or DIN 931. Both are still sold.

What bolt does a 13 mm spanner fit?

M8, by both ISO and DIN. A 10 mm spanner fits M6, 17 mm an M10 made to DIN, 19 mm an M12 made to DIN and 24 mm an M16.

What bolt does a 24 mm spanner fit?

M16, by both standards. The nut takes the same spanner.

What hex key fits an M8 socket head screw?

6 mm. M6 takes 5 mm, M10 takes 8 mm and M12 takes 10 mm.

Do a nut and its bolt take the same spanner?

Yes, as long as both are made to the same standard. An ISO 4032 nut matches an ISO bolt and a DIN 934 nut a DIN bolt.

Read next