Tap drill calculator
Pick a thread and get the drill to make before you tap it, for metric coarse and fine, UNC and UNF threads.
5.0 mm
drill for an M6 tap
Thread 6.0 mm across, 1 mm pitch
How the drill size is worked out
A tap cuts its thread into the wall of a hole, so the hole has to be smaller than the thread. For a metric thread you take the pitch, the distance from one thread to the next, off the size:
drill = size − pitch
M6 has a 1 mm pitch, so it takes a 5 mm drill. M8 has 1.25 mm, which gives 6.75, and the chart rounds it to the 6.8 mm drill you can buy. That leaves about 75% of a full thread, which is what tap drill charts aim for: nearly all the strength, and far less work for the tap than a full thread.
Inch taps take drills sold by number, letter or fraction (#7, F, 27/64), so the calculator names the drill and gives its size in inches and millimetres. A 1/4-20 tap takes a #7 drill, 0.201 in.
Coarse or fine thread?
A bolt called just M10 has the standard, coarse thread, 1.5 mm apart. Fine threads such as M10 × 1.25 are closer together. They hold better against vibration and in thin walls and let you adjust in smaller steps, but they need a fine tap and a bolt with the same pitch. Fine threads start at M8: below that, ISO lists none for bolts and nuts.
Tap drills for metric fine threads
| Thread | Pitch | Drill |
|---|---|---|
| M8 × 1 | 1 mm | 7.0 mm |
| M10 × 1.25 | 1.25 mm | 8.8 mm |
| M10 × 1 | 1 mm | 9.0 mm |
| M12 × 1.5 | 1.5 mm | 10.5 mm |
| M12 × 1.25 | 1.25 mm | 10.8 mm |
| M14 × 1.5 | 1.5 mm | 12.5 mm |
| M16 × 1.5 | 1.5 mm | 14.5 mm |
| M18 × 2 | 2 mm | 16.0 mm |
| M18 × 1.5 | 1.5 mm | 16.5 mm |
| M20 × 2 | 2 mm | 18.0 mm |
| M20 × 1.5 | 1.5 mm | 18.5 mm |
| M22 × 2 | 2 mm | 20.0 mm |
| M22 × 1.5 | 1.5 mm | 20.5 mm |
| M24 × 2 | 2 mm | 22.0 mm |
The coarse metric, UNC and UNF charts are in our tap drill chart, with how to tap a hole straight.
Tapping 3D printed parts
Draw the hole at the drill size and tap it after printing. Printed holes come out a little small, so print a test piece first. To pass a bolt through instead, draw the clearance hole from our bolt size chart.
Questions people ask
What size drill for an M8 tap?
6.8 mm for the standard M8 thread. The fine M8 × 1 thread takes a 7 mm drill.
What size drill for an M10 × 1.25 tap?
8.8 mm. Ten minus the 1.25 mm pitch is 8.75, and 8.8 mm is the drill you can buy.
What size drill for a 3/8-16 tap?
A 5/16 in drill, which is 0.3125 in or 7.94 mm. For a 3/8-24 fine thread, a letter Q drill, 0.332 in or 8.43 mm.
How do I work out a tap drill size?
For a metric thread, take the pitch off the size: M6 × 1 needs 6 − 1 = 5 mm. For an inch thread, take one turn's length (1 divided by the threads per inch) off the size and pick the nearest drill, or read it from the chart.
Why is my tap drill bigger than the chart's in steel?
Machinists often go a little bigger in hard metals so the tap cuts less. Little Machine Shop's chart gives 5.4 mm for M6 and 7.2 mm for M8, which leaves about half a thread instead of three quarters, still strong enough for most work.
Read next
- Tap drill size chart and calculator for every threadM3 takes a 2.5 mm drill, M4 3.3, M5 4.2, M6 5, M8 6.8 and M10 8.5. Every metric thread from M1.6 to M24, and UNC and UNF to 3/4 inch, with a calculator.
- Metric bolt size chart: spanner and hex key sizes, M2 to M24Which spanner fits which bolt, and which bolt fits your spanner: M6 takes 10 mm, M8 13 mm, M10 16 mm (17 for DIN). Hex keys, holes and tap drills, M2 to M24.